Reference: SKU: XTRAIL-4GR
Brand: Acorn-AU
Reference: SKU: XTRAIL-4GR
Brand: Acorn-AU
Reference: SKU: XTRAIL-4CR
Brand: Acorn-AU
Reference: Eneloop-1
Brand: Panasonic
Reference: SKU: LL-2A
Brand: Cuddeback
Reference: SKU: XTRAIL-SB
Brand: Camlock
Reference: SKU: GPE8W
Brand: Garde Pro
Reference: XTRAIL-4GCS
Brand: Acorn-AU
Reference: SKU: CAM-MB
Brand: Camlock
Reference: SKU: XTRAIL-4GW
Brand: Acorn-AU
Reference: XTRAIL-SP200
Brand: Acorn-AU
Reference: SKU: PYTHON
Brand: Gotcha
Reference: Eneloop-w1
Brand: Panasonic
Cuddelink L Series cameras are the perfect solution for remote wildlife and farm security.
Fast Delivery Australia wide
30 Day Money Back Guarantee
12 months Australian Warranty
Great tech support
Bulk order Discounts on Selected Items

I purchased the cuddelink 4 camera pro pack for my farm. I must say that it was very simple to setup and works well. The pictures are not as sharp as some other cameras on the market but cuddelink is the only system that can send via other cameras on the network.
Great product and good service. The Cuddelink system works great for us.
Added one to my network and love it. The transmitted picture is better than past cameras, and it's compatible with my J and G cameras. Some cool new settings and cheaper price make this a no brainer.
The CuddeLink On-Site system allows up to 23 cameras to remotely send images to the HOME camera. Users now only need to check a single SD card from the HOME camera to view all images from all cameras in the network.
Cuddelink is Not Wi-Fi, not cellular, CuddeLink is a private wireless network where up to 23 cameras send their images to a central home device or storage unit.
Remote refers to cameras that transmit images to the HOME. Repeater refers to a device that acts as a relay station on a CuddeLink network. The REPEATER does not take pictures, it only transmits images from one node to the next node. Node is a general name for any home, remote or repeater on the network.
When running a camera in remote mode, images can be sent to the home camera at user definded intervals depending on the selected menu option.
You can use Cuddelink cameras without a cell plan just by linking them together. Each camera sends the photos to the home camera. As long as the cameras are close enough and the signal is strong enough between cameras. It is not dependent on cell coverage.
Advanced technology and features for leading edge performance. CuddeLink built in. Functions as Home, Remote, or Repeater.
The wireless transmission range can be up to 1 kilometre or more (line of sight), subject to terrain and the camera base location.
No because each camera operates on a radio network so there are no costs involved.
It is already possible to run the solar to charge an external dual battery bank consisting of rechargeable D batteries, which is connected directly to the camera as a power source. We do not recommend the use of rechargeable batteries within the camera. The battery voltage is too low to properly operate the camera.
Every CuddeLink cameras must have an SD card installed. Any size card from 16B to 256GB can be used in the LL-Series cameras. We recommend you use name brand quality SD cards.
No app is required to run your cuddelink system as the 4G Cell Home is not available in Australia at the moment.
If you have upgraded to the new GEN3 firmware you will notice that the menu options have changed. You can change this back to the FULL Menu by turning off the camera and then hold down the Mode button down until you see the menu option QUICK Menu or FULL Menu, press the up arrow button to confirm your selection.
Reference: SKU: PW-003
Brand: Cuddeback
Reference: SKU: LL-2A
Brand: Cuddeback
Reference: SKU: SL-001SB
Brand: Cuddeback
Reference: SKU: LL-1A
Brand: Cuddeback